Specific process of electronic refrigeration technology in Customized Purification Electronic Heating Vertical 5 gallon office water cooler With Locker

Electronic refrigeration technology, also known as thermoelectric refrigeration or semiconductor refrigeration, is a physical refrigeration method based on the thermoelectric effect. It uses the temperature difference effect generated by thermocouple pairs (P-type and N-type semiconductor materials) under the action of direct current to achieve refrigeration. When current passes through the thermocouple pair, one end absorbs heat and becomes cool, while the other end releases heat and becomes warm. This technology does not require the participation of traditional refrigerants and has the advantages of environmental protection, no noise, and no vibration.

In Customized Purification Electronic Heating Vertical 5 Gallon Office Water Cooler With Locker, the application of electronic refrigeration technology is mainly reflected in the cold water preparation link.
Start the cooling mode: After the user selects the cold water mode through the control panel, the control system of the water dispenser will send a start signal to the electronic refrigeration module.
Current drive: After the electronic refrigeration module receives the signal, the internal thermocouple pair starts to work. When direct current passes through the thermocouple pair, a temperature difference effect is generated, causing one end of the heat exchanger in the cold water tank to cool down rapidly.
Heat exchange: The water in the cold water tank contacts the cooling end through the heat exchanger to achieve heat transfer. As the heat is continuously absorbed, the water temperature gradually drops and eventually reaches the set cold water temperature range (10°C-15°C).
Heat dissipation: At the same time, the other end of the thermocouple pair will release heat, and this part of the heat needs to be discharged from the outside of the water dispenser through the radiator in time to ensure the continuous and stable cooling effect. The cooling system of the water dispenser usually adopts efficient air cooling or heat pipe cooling technology to ensure that the heat can be quickly dissipated.
Temperature control: In order to keep the water temperature constant, the water dispenser is built with a precise temperature sensor and control system. When the water temperature reaches the set value, the control system will automatically adjust the current or turn off the refrigeration module to avoid too low water temperature or energy waste.
Safety protection: During the entire cooling process, the water dispenser is also equipped with multiple safety protection measures, such as overload protection, short circuit protection, etc., to ensure the safe operation of the equipment and the safety of users.

The electronic refrigeration technology of Customized Purification Electronic Heating Vertical 5 Gallon Office Water Cooler With Locker realizes the rapid preparation and stable control of cold water through the thermoelectric effect. The application of this technology not only improves the refrigeration efficiency and user experience of the water dispenser, but also demonstrates the innovation and development of modern technology in the field of drinking water equipment.