English
عربى
Tel: +86-15168545254
Email: Maintaining a standing water dispenser is essential to ensure it provides clean, safe, and refreshing water. Here are the steps to effectively maintain a standing water dispenser:
1.Regular Cleaning:
Unplug the Dispenser: Before cleaning, unplug the dispenser from the electrical outlet if it has cooling or heating functions.
Empty the Drip Tray: Remove the drip tray and empty any accumulated water or spills.
2.Cleaning the Exterior:
Use a damp cloth and mild, soapy water to clean the exterior of the dispenser, including the control panel and buttons.
Be careful not to let water enter the electrical components.
3.Cleaning the Water Reservoir:
If your dispenser has a removable water reservoir, take it out.
Wash the reservoir with warm, soapy water and rinse thoroughly.
Allow it to air dry completely before reassembling it.
4.Cleaning the Drip Tray and Nozzles:
Remove the drip tray and nozzles (if they are removable).
Wash them with warm, soapy water, and rinse thoroughly.
Ensure there is no residue or mold growth.
Allow them to dry completely.
5.Sanitizing:
Periodically sanitize the dispenser to prevent bacterial growth.
Mix a solution of one part white vinegar to three parts water.
Run this solution through the dispenser by pressing the water buttons or levers until the reservoir is empty.
Rinse the reservoir and dispenser thoroughly with clean water.
6.Changing Filters:
If your dispenser has a water filtration system, follow the manufacturer's guidelines for changing the filter. Typically, filters should be replaced every few months or according to the specified timeframe.
7.Cleaning the Cooling and Heating Components:
If your dispenser has a cooling or heating function, consult the user manual for specific cleaning instructions.
Typically, these components require minimal maintenance, but it's essential to keep them clean to ensure efficient operation.
8.Inspect for Leaks:
Periodically check for any leaks around the dispenser. If you notice any, address the issue promptly to prevent water damage.
9.Maintaining Bottleless Dispensers:
For bottleless dispensers connected to a water supply, ensure that the water source is clean and safe. Install a water filtration system if needed.
Inspect the water lines and connections for any signs of leaks or blockages.
Customized Purification Electronic Heating Vertical 5 gallon office water cooler With Locker
This water dispenser adopts electronic refrigeration, and the three water outlets of cold water, hot water and warm water can be selected at any time according to your own situation. Cold water temperature range: 10°C-15°C.
The water outlet adopts the top push-type antibacterial faucet, which is convenient and simple. There is a child lock to protect the safety of children.
An indicator light is set on the top to check the working status of the water dispenser at any time.
The large space at the bottom can be used as your storage room.
Automatic power off device to protect your safety.
Tel: +86-15168545254
Email: 
Huatang Village, Fuhai Town, Cixi City, Zhejiang Province